View CPC5600A_197114.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

LITELINKTM (CPC5600 AND CPC5604) Optical Data Access Arrangement
Application Note Upgrading from CPC5600 to CPC5604
November,1999
APPLICATION NOTE UPGRADING FROM CPC5600 TO CPC5604
Contents
1.0 2.0 3.0
3.1 3.1.1 3.2 3.2.1
Introduction ...................................................................................................... 3 Product Comparison ....................................................................................... 3 Package Drawings
CPC5600 Package Drawing .......................................................................................... 4 CPC5600 Pin Definitions and Functions ....................................................................... 4 CPC5604 Package Drawing .......................................................................................... 5 CPC5604 Pin Definitions and Functions ....................................................................... 5
4.0
4.1 4.1.1 4.2 4.2.1 4.3 4.4
LITELINK Family Compatible Reference Designs
North American Family Compatible Schematic ........................................................... 6 North American Family Compatible BOM .................................................................... 7 International Family Compatible Schematic ................................................................. 8 International Family Compatible BOM .......................................................................... 9 Family Compatible Lucent Reference Design ............................................................ 10 Family Compatible Conexant Reference Design ....................................................... 11
5.0
5.1 5.1.1 5.2 5.2.1 5.3 5.3.1 5.4 5.4.1 5.5 5.6
CPC5604 Optimized Reference Designs
CPC5604 North American Schematic ........................................................................ 12 CPC5604 North American BOM ................................................................................. 13 CPC5604 International Schematic .............................................................................. 14 CPC5604 International BOM ....................................................................................... 15 CPC5604 CTR21 Schematic ....................................................................................... 16 CPC5604 CTR21 BOM ................................................................................................ 17 CPC5604 CTR21 with exceptions Schematic ............................................................ 18 CPC5604 CTR21 with exceptions BOM ..................................................................... 19 CPC5604 Lucent Reference design ............................................................................ 20 CPC5604 Conexant Reference design ....................................................................... 21
2
North America Tel: 1-800-272-5273 Fax: 978-524-4900
Europe Tel: +32-11-300868 Fax: +32-11-300890
Asia Tel: 886-2-2523-6368 Fax: 886-2-2523-6369
Japan Tel: 03-3980-2212 Fax: 03-3980-2213
APPLICATION NOTE UPGRADING FROM CPC5600 TO CPC5604
LiteLinkTM Family of Optical Data Access Arrangement
1.0 Introduction
CP Clare's LITELINKTM family of single package DAA solutions can be used for a variety of telephone line interface applications including high performance 56kbps modems. The LITELINKTM family of products are advanced integrated circuits that use optical signal coupling techniques to provide the required electrical isolation between the telephone line and the user's host circuitry. The LITELINKTM family differs from other DAA solutions utilizing either optical or capacitive isolation techniques by including the barrier inside the IC package which eliminates the need for external high voltage capacitors or optocouplers in the data path, thus saving board space and lowering cost. The LITELINKTM family of products has been designed to meet or exceed the requirements of international regulatory agencies. The CPC5600 was the first in the series of LITELINKTM products. The CPC5600 low profile package and optical isolation barrier offers designers the opportunity to implement a full DAA circuit using less board space than previously possible. The CPC5604 is the next generation of LITELINKTM product. The CPC5604 offers the same optical isolation barrier and all the benefits of the CPC5600 along with a lower noise floor that allows higher data through put rates. The CPC5604 also takes the CP Clare's international solution one step further by simplifying the implementation of CTR21. The key features of the LITELINKTM family of DAAs are as follows: s Full differential or single ended transmit and receive signal coupling from the telephone line to the host system s High voltage (1500 VRMS ) isolation between telephone line and host s Ring signal detection
s s s s s s s
Caller ID signal detection Hookswitch function Internal 2-4 wire converter Low power consumption Flat frequency response 30-4000Hz Low THD -80db Minimum number of external components required Programmable International solution with CPC5601 chip PC Card and PCMCIA compatible packaging
s
s s
Current Limiting For international PTT compliance, external passive components can be changed to meet different country requirements. Using the LITELINK TM in conjunction with the CPC5601 programmable driver, will offer a software programmable solution using a digital serial interface to the host's microcontroller. See CPC5601 Data Sheet for details on software programmable solutions.
2.0 Product Comparison
The CPC5600 differs from the CPC5604 in the following manner:
Characteristic Average in band Noise Function of pin 22 CPC5600 -90 db Main loop current path from Tip to Ring (IDC) CPC5604 -100db DC Filter (DCF)
The CPC5604 also contains enhancements to the chip to provide a greater margin in meeting section 4.6.2 Loop current Characteristics of CTR21.
North America Tel: 1-800-272-5273 Fax: 978-524-4900
Europe Tel: +32-11-300868 Fax: +32-11-300890
Asia Tel: 886-2-2523-6368 Fax: 886-2-2523-6369
Japan Tel: 03-3980-2212 Fax: 03-3980-2213
3
APPLICATION NOTE UPGRADING FROM CPC5600 TO CPC5604
3.0 Package Drawings
3.1
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
CPC5600 Package Drawing
VCC TXF1 TXTX+ TX NC GND OH RING CID RXRX+ SNP+ SNPRXF RX BRTXF2 ZTX ZNT TXS BRNTS GAT REF DCS IDC ZDC BRRPB RXS VDD 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17
3.1.1 Pin # 1 2 3 4 5 6 7 8 9
CPC5600 Pin Definitions and Functions Name VCC TXF1 TX TX+ TX NC GND OH RING Function Host power supply, +5 Volts +/-5%. TX isolation amplifier output. NEG differential transmit signal into DAA. POS differential transmit signal into DAA. TX differential amplifier input. Not Connected. Connect to host analog ground. Driving this signal low asserts the off-hook condition. Active low indicates an incoming half waved ring signal pulsed High to Low at the ring frequencytypically 20Hz. Driving this signal low places the Caller ID information on the RX pins when the DAA is on hook (OH is de-asserted). NEG differential analog receive signal from the telephone line and must be AC coupled with a 0.1 uF capacitor. POS differential analog receive signal from the telephone line and must be AC coupled with a 0.1 uF capacitor. One of two differential snoop inputs. One of two differential snoop inputs. Receive photodiode amplifier output. Receive photoamplifier summing junction. Power supply for line side portion of CPC5600A. Receive photodiode servo input. Sets receive LED prebias current. Return to bridge rectifier negative output. Sets electronic inductor DCR/Current Limit. Main loop current path from Tip to Ring. VI slope control via external resistor. 1.25V internal voltage reference. Depletion MOSFET gate control. Receive signal input path via Tip and Ring. Return to bridge rectifier negative output. Receive photodiode amplifier input. Sets DAA impedance via external passive network. Transmit Transconductance gain setting pin. Receive photodiode amplifier output. Return to bridge rectifier negative output.
10
CID
11
RX-
12
RX+
13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
SNP+ SNPRXF RX VDD RXS RPB BRZDC IDC DCS REF GAT NTS BRTXS ZNT ZTX TXF2 BR-
4
North America Tel: 1-800-272-5273 Fax: 978-524-4900
Europe Tel: +32-11-300868 Fax: +32-11-300890
Asia Tel: 886-2-2523-6368 Fax: 886-2-2523-6369
Japan Tel: 03-3980-2212 Fax: 03-3980-2213
APPLICATION NOTE UPGRADING FROM CPC5600 TO CPC5604
3.2
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
CPC5604 Package Drawing
VCC TXF1 TXTX+ TX NC GND OH RING CID RXRX+ SNP+ SNPRXF RX BRTXF2 ZTX ZNT TXS BRNTS GAT REF DCS DCF ZDC BRRPB RXS VDD 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17
3.2.1. Pin # 1 2 3 4 5 6 7 8 9
CPC5604 Pin Definitions and Functions Name VCC TXF1 TX TX+ TX NC GND OH RING Function Host power supply, +5 Volts +/-5%. TX isolation amplifier output. NEG differential transmit signal into DAA. POS differential transmit signal into DAA. TX differential amplifier input. Not Connected. Connect to host analog ground. Driving this signal low asserts the off-hook condition. Active low indicates an incoming half waved ring signal pulsed High to Low at the ring frequencytypically 20Hz. Driving this signal low places the Caller ID information on the RX pins when the DAA is on hook (OH is de-asserted). NEG differential analog receive signal from the telephone line and must be AC coupled with a 0.1 uF capacitor. POS differential analog receive signal from the telephone line and must be AC coupled with a 0.1 uF capacitor. One of two differential snoop inputs. One of two differential snoop inputs. Receive photodiode amplifier output. Receive photoamplifier summing junction. Power supply for line side portion of CPC5604. Receive photodiode servo input. Sets receive LED prebias current. Return to bridge rectifier negative output. Sets electronic inductor DCR/Current Limit. DC Filter Point. VI slope control via external resistor. 1.25V internal voltage reference. Depletion MOSFET gate control. Receive signal input path via Tip and Ring. Return to bridge rectifier negative output. Receive photodiode amplifier input. Sets DAA impedance via external passive network. Transmit Transconductance gain setting pin. Receive photodiode amplifier output. Return to bridge rectifier negative output.
10
CID
11
RX-
12
RX+
13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
SNP+ SNPRXF RX VDD RXS RPB BRZDC DCF DCS REF GAT NTS BRTXS ZNT ZTX TXF2 BR-
North America Tel: 1-800-272-5273 Fax: 978-524-4900
Europe Tel: +32-11-300868 Fax: +32-11-300890
Asia Tel: 886-2-2523-6368 Fax: 886-2-2523-6369
Japan Tel: 03-3980-2212 Fax: 03-3980-2213
5
Component
6
C9 OPEN
+
4.1
APPLICATION NOTE
4.0 Family Compatible Schematics
UPGRADING FROM CPC5600 TO CPC5604
The upgrade path from the CPC5600 to the CPC5604 is easy using the Family Compatible schematics. The schematics are also included in the CPC5600 datasheet and Application note and were designed to allow the design
North America Tel: 1-800-272-5273 Fax: 978-524-4900
C8 R10 C10 0.001uF 500V R11 10K D1 1 2 C23 OPEN
R37 0 ohm
VCC
TX-
TX+ R2 200K G1 4 SP1 P3100SB 2D
R1 604K
U1
R19 12M 0.250W 3 +
10M
C1 0.1uF
C2 0.1uF
~ -
~
TIP
C3 0.1uF R7 150K R36 4.7
Q1 MOSFET 3 S CPC5602C
OH
C22 OPEN
1 2 3 4 5 6 7 32 31 30 29 28 27 26 25 24
VREF R8 C12 R20 1.6M R15 100 R16 8.2
1/ 8W
RING
RING
CID
RXC11
North American Family Compatible Schematic
Europe Tel: +32-11-300868 Fax: +32-11-300890
8 9 10 11 12 13 14 15 16 23 22 21 20 19 18 17
R12 402K VREF R17 300 C24 R13 806K .063W R14 806K .063W C7 220pF R5 2000V 1.5M R18 604 R6 C6 220pF 1.5M 2000V
C4 0.1uF
RX+
C5 0.1uF
R3 150K
VCC TXF1 TXTX+ TX NC GND OH RING CID RXRX+ SNP+ SNPRXF RX BRTXF2 ZTX ZNT TXS BRNTS GAT CPC5600A / REF CPC5604A DCS DCF / IDC ZDC BRRPB RXS VDD
R4 1M
engineer board population options to accommodate both LITELINK products. Each Schematic contains a table showing the optional components and the values necessary to implement the CPC5600 or the CPC5604.
Asia Tel: 886-2-2523-6368 Fax: 886-2-2523-6369
Table 1
CPC5600A R8 C8 C11 C12 C24 0.027uF Open 0.01uF 0.47uF 0 Ohm Open 0.1uF 0.47uF Tant Open 0.01uF
ALL RESISTORS ARE .100W UNLESS OTHERWISE NOTED
CPC5604
Drawn: JC/MG Date: 10/27/99 Company: CP Clare Corp. Title: U.S. Reference Design Rev: I
Japan Tel: 03-3980-2212 Fax: 03-3980-2213
APPLICATION NOTE UPGRADING FROM CPC5600 TO CPC5604
4.1.1 North American Family Compatible BOM
QTY. 1 1 1 1 1 1 1 2 2 1 1 1 2 1 1 1 1 1 1 1 5 2 1 1 1 1 1 1 1 1 1 37
Designation U1 Q1 R1 R18 R2 R4 R8 R3, R7 R5, R6 R11 R12 R15 R13, R14 R16 R17 R10 R19 R20 R36 R37 C1, C2, C3, C4, C5 C6, C7 C8 C11 C9 C10 C12 C23 C24 D1 SP1 TOTAL
Description CPC5600A CPC5602C 604k 1% Res. 604 ohm 1% Res. 200k 5% Res. 1M ohms 5% Res. See Schematic Table 1 150k 5% Res. 1.5M 5% Res. 10 K 5% Res. 402k 1% Res. 100 ohm 5% Res. 806K 1% Res. 0.063W 8.2 5% Res. 1/8W 300 ohm 5% Res. 10M 5% Res. 12M 5% Res. 0.25W 1.6M 5% Res. 4.7 ohm 5% Res 1/8 W 0 ohm Res. 0.1 uf 50V 10% X7R 220 pf 2000V NPO 5% See Schematic Table 1 See Schematic Table 1 Open 0.001uf 500V10% X7R See Schematic Table 1 Open See Schematic Table 1 Bridge Rectifier Surge Protection
Manufacturer CP Clare CP Clare Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Tecate Tecate Tecate Tecate/Panasonic Tecate Tecate Tecate Shindengen Teccor
Package Type 32 Lead SOIC SOT-223 `0603 `0603 `0603 `0603 `0603 `0603 `0603 `0603 `0603 `0603 `0603 `0603 `0603 `0603 `0805 `0805 `0603 `0603 `0805 1808 `0805 SMD 1206 `0805 `0805 N/A D0-214AA
North America Tel: 1-800-272-5273 Fax: 978-524-4900
Europe Tel: +32-11-300868 Fax: +32-11-300890
Asia Tel: 886-2-2523-6368 Fax: 886-2-2523-6369
Japan Tel: 03-3980-2212 Fax: 03-3980-2213
7
OPTIONAL: SOFTWARE PROGRAMMABLE CIRCUIT OPEN 8 BIT6 BIT5 CPC5601 9
Component
8
VCC C9 OPEN C8 R1 604K
+
4.2
R10 C10 0.001uF 500V R11 10K D1 1 2 C23 OPEN G1 4 SP1 P3100SB 2D
R37 0 ohm
TX3 + R2 200K R19 12M 0.250W
U1
10M
APPLICATION NOTE
UPGRADING FROM CPC5600 TO CPC5604
North America Tel: 1-800-272-5273 Fax: 978-524-4900
TX+
C1 0.1uF
C2 0.1uF
~ -
~
TIP
OH C22 OPEN 150K
C3 0.1uF R7
Q1 MOSFET 3 S CPC5602C
1 2 3 4 5 6 7 32 31 30 29 28 27 26
R36 4.7
RING VREF C12 R8 R20 1.6M R15 100 R16 22.1
1/ W 8
R34 0 ohm
25 24
RING
CID
RXC11
C4 0.1uF
RX+ R12 402K R17 300 VREF
C5 0.1uF
R3 150K
8 9 10 11 12 13 14 15 16 23 22 21 20 19 18 17
C24
R13 806K .063W R14 806K .063W C7 220pF R5 2000V 1.5M
International Family Compatible Schematic
VCC TXF1 TXTX+ TX NC GND OH RING CID RXRX+ SNP+ SNPRXF RX BRTXF2 ZTX ZNT TXS BRNTS GAT CPC5600A / REF CPC5604A DCS DCF / IDC ZDC BRRPB RXS VDD
Europe Tel: +32-11-300868 Fax: +32-11-300890
R4 1M R6 C6 220pF 1.5M 2000V U4 Z1* Z2* R24* 2 8.2K 0.250W 0.47uF 300V 3 3 16 3 D2 * 2 14 13 3 590 12 BIT2 7 BRBIT3 BIT4 10 R31 OPEN 11 R29 R30 OPEN C17 OPEN 0 ohm C16 0.0047uf R27 R28 OPEN C15 OPEN 6 N/C R18 604 OPEN BIT1 R25 R26 0 ohm 2 B R22* A 15 2 0 Ohm C14* 1
VCC
R21* 10K
Asia Tel: 886-2-2523-6368 Fax: 886-2-2523-6369
R32 OPEN R33 12.1
DATA_IN
R23
Table 2
CPC5600A R8 C8 C11 C12 C24 0 Ohm 0.47uF 0.01uF 0.027uF Open CPC5604 Open 0.1uF 0.47uF Tant Open 0.01uF
Date: 10/27/99 Company: CP Clare Corp. ALL RESISTORS ARE .100W UNLESS OTHERWISE NOTED Title: International Reference Design Rev: J
470
Japan Tel: 03-3980-2212 Fax: 03-3980-2213
* For external ring detect only.
Drawn: JC/MG
APPLICATION NOTE UPGRADING FROM CPC5600 TO CPC5604
4.2.1 International Family Compatible BOM QTY. 1 1 1 1 1 1 1 1 2 2 1 1 1 2 1 1 1 1 1 1 1 4 1 1 1 1 1 1 1 1 5 2 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 56 Designation U1 U4 Q1 R1 R18 R2 R4 R8 R3, R7 R5, R6 R11 R12 R15 R13, R14 R16 R17 R10 R19 R20 R23 R24 R29, R30, R31, R32 R25 R26 R27 R28 R33 R34 R36 R37 C1, C2, C3, C4, C5 C6, C7 C8 C11 C9 C10 C12 C14 C15 C16 C17 C23 C24 SP1 Z1, Z2 D1 D2 TOTAL Description CPC5600A CPC5601D CPC5602C 604k ohm 1% Res. 604 ohm 1% Res. 200k ohm 5% Res. 1M ohn 5% Res. See Schematic Table 2 150k ohm5% Res. 1.5M ohm5% Res. 10 K ohm 5% Res. 402k ohm 1% Res. 100 ohm 5% Res. 806K 1% ohm Res. 0.063W 22.1 ohm 5% Res. 1/8W 300 ohm 5% Res. 10M ohm5% Res. 12M ohm5% Res. 0.25W 1.6M ohm 5% Res. 470 ohm 5% Res. 8.2k ohm 5% Res. 0.25W Open 590 ohm 5% Res. 0 ohm Res. 0 ohm Res. Open 12.1 ohm 5% Res. 0 ohm Res. 4.7 ohm 5% Res 1/8 W 0 ohm Res. 0.1 uf 50V 10% X7R 220 pf 2000V NPO 5% See Schematic Table 2 See Schematic Table 2 Open 0.001uf 500V10% X7R See Schematic Table 2 .47uf 300V Open 0.0047 uf 50V 10% X7R Open for future use Open See Schematic Table 2 Surge Protection Zener 20V Bridge Rectifier Diode BAS16 Manufacturer CP Clare CP Clare CP Clare Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Tecate Tecate Tecate Tecate/Panasonic Tecate Tecate Tecate Tecate Tecate Teccor Rohm Shindengen Rohm Package Type 32 Lead SOIC SO16 SOT-223 `0603 `0603 `0603 0603 0603 `0603 `0603 `0603 `0603 `0603 `0603 `0603 `0603 `0603 `0805 `0805 `0603 `0603 `0603 `0603 `0603 `0603 `0603 `0603 `0603 `0603 `0603 `0805 1808 `0805 SMD 1206 `0805 1812 `0805 `0805 `0805 `0805 D0-214AA SOT-23 N/A SOT-23
North America Tel: 1-800-272-5273 Fax: 978-524-4900
Europe Tel: +32-11-300868 Fax: +32-11-300890
Asia Tel: 886-2-2523-6368 Fax: 886-2-2523-6369
Japan Tel: 03-3980-2212 Fax: 03-3980-2213
9
10
VCC
4.3
Refer to LITELINK reference schematics for typical line side circuit details
APPLICATION NOTE
UPGRADING FROM CPC5600 TO CPC5604
North America Tel: 1-800-272-5273 Fax: 978-524-4900
R1 604K
Lucent Technologies Venus DSP1670_160_MQFP
U1
R2 200K
OHRCN 61
C1 0.1uF C2 0.1uF C22 OPEN C3 0.1uF
RIDETN 43
1 2 3 4 5 6 7 32 31 30 29 28 27 26 25 24
Family Compatible Lucent Reference Design
CIDN 62
Europe Tel: +32-11-300868 Fax: +32-11-300890
R3 150K
Lucent Technologies CSP1034_MFQP
8 9 10 11 12 13 14 15 16
VCC TXF1 TXTX+ TX NC GND OH RING CID RXRX+ SNP+ SNPRXF RX BRTXF2 ZTX ZNT TXS BRNTS GAT CPC5600A / REF CPC5604A DCS DCF / IDC ZDC BRRPB RXS VDD 23 22 21 20 19 18 17
AOUTN 8
0dB
1
AOUTP 7 11
C5 0.1uF
AINP
0dB
1
C4 0.1uF
Asia Tel: 886-2-2523-6368 Fax: 886-2-2523-6369
AINN 10
R4 1M
C7 220pF R5 2000V 1.5M
R6 C6 220pF 1.5M 2000V
Drawn: ADH
Date: 6/25/99 Company: CP Clare Corp. Title: Interconnection To Lucent
Rev: C
Japan Tel: 03-3980-2212 Fax: 03-3980-2213
1. Lucent chips expect a zero dB drop between the codec and Tip and Ring.
ALL RESISTORS ARE .100W UNLESS OTHERWISE NOTED
4.4
Conexant MCU L2800
VCC
Refer to LITELINK reference schematics for typical line side circuit details.
North America Tel: 1-800-272-5273 Fax: 978-524-4900
R1 10K .063W R4 604K
~Rly1(~OH) 70
RINGD 32
U1
R5 200K
~RLY4(~CALLID) 6 R2 10K .063W C1 0.1uF C2 0.1uF C3 0.1uF C22 OPEN
R3 20K .063W
1 2 3 4 5 6 7
32 31 30 29 28 27 26 25 24
Family Compatible Conexant Reference Design
Europe Tel: +32-11-300868 Fax: +32-11-300890
Conexant MDP R6764
TXA1 30
R6 150K
-6dB 1
C5 0.1uF
TXA2 31
8 9 10 11 12 13 14 15 16
VCC TXF1 TXTX+ TX NC GND OH RING CID RXRX+ SNP+ SNPRXF RX BRTXF2 ZTX ZNT TXS BRNTS GAT CPC5600A / REF CPC5604A DCS DCF / IDC ZDC BRRPB RXS VDD
23 22 21 20 19 18 17
RiN 35
-6dB 1
C7 220pF R8 2000V 1.5M R7 1M R9 C6 220pF 1.5M 2000V
Asia Tel: 886-2-2523-6368 Fax: 886-2-2523-6369
Drawn: ADH
Date: 6/25/99 Company: CP Clare Corp.
Rev: C
UPGRADING FROM CPC5600 TO CPC5604
Japan Tel: 03-3980-2212 Fax: 03-3980-2213
Title: Interconnection to Conexant(Rockwell)
APPLICATION NOTE
Interconnection diagram is based on the Conexant(Rockwell) RC56D Chip solution. 1. Conexant Chipsets rely on a 6dB loss between MDP and tip and ring. This is solved by placing the R1, R2, R3, resistor circuit in the Transmit Path and the use of a single end of the differential receive.
ALL RESISTORS ARE .100W UNLESS OTHERWISE NOTED
11
APPLICATION NOTE UPGRADING FROM CPC5600 TO CPC5604 5.0 CPC5604 Optimized Schematics
The following schematics are optimized versions of the Family Compatible schematics that allow a lower component count implementation of the CPC5604 LITELINK design. They do not allow backward compat5.1 CPC5604 North American Schematic
RING
ibility to the CPC5600. The schematics below should be used in designs where the performance of the CPC5604 is required.
TIP
SP1 P3100SB
Date: 10/27/99
R19 12M 0.250W
Q1 MOSFET 3 S CPC5602C
R36 4.7
R20 1.6M
2D
1/ W 8
R16 8.2
R17 300
0.001uF 500V
G1
R13 806K .063W
C10
R15 100
R18 604
R10
10M
0.1uF
C8
150K
R7
32 31 30 29 28 27 26
25 24
23 22 21 20 19 18 17
C11 0.47uF Tant
CPC5604
U1
BRTXF2 ZTX ZNT TXS BRNTS GAT REF DCS DCF ZDC BRRPB RXS VDD
C24 0.01uF
C7 220pF R5 2000V 1.5M
806K .063W
R12 402K
R11 10K
R14
1 2 3 4 5 6 7
R2 200K
C3 0.1uF
R3 150K
8 9 10 11 12 13 14 15 16
VCC TXF1 TXTX+ TX NC GND OH RING CID RXRX+ SNP+ SNPRXF RX
VCC
R1 604K
C2 0.1uF
C1 0.1uF
C4 0.1uF
RING
12
North America Tel: 1-800-272-5273 Fax: 978-524-4900
Europe Tel: +32-11-300868 Fax: +32-11-300890
CID
RX+
TX+
TX-
OH
RX-
C5 0.1uF
Asia Tel: 886-2-2523-6368 Fax: 886-2-2523-6369
R4 1M
R6 C6 220pF 1.5M 2000V
Company: CP Clare Corp.
Drawn: JC/MG
Japan Tel: 03-3980-2212 Fax: 03-3980-2213
Title: U.S. Reference Design
3
D1
1
~
4
-
ALL RESISTORS ARE .100W UNLESS OTHERWISE NOTED
2
+
~
Rev:
B
APPLICATION NOTE UPGRADING FROM CPC5600 TO CPC5604
5.1.1 CPC5604 North American BOM
QTY. 1 1 1 1 1 1 2 2 1 1 1 1 2 1 1 1 1 1 1 5 2 1 1 1 1 1 1 33
Designation U1 Q1 R1 R18 R2 R4 R3, R7 R5, R6 R8 R11 R12 R15 R13, R14 R16 R17 R10 R19 R20 R36 C1, C2, C3, C4, C5 C6, C7 C8 C10 C11 C24 D1 SP1 TOTAL
Description CPC5604A CPC5602C 604k 1% Res. 604 ohm 1% Res. 200k 5% Res. 1M 5% Res 150k 5% Res. 1.5M 5% Res. 1.0M 5% Res 10 K 5% Res. 402k 1% Res. 100 ohm 5% Res. 806K 1% Res. 0.063W 8.2 5% Res. 1/8W 300 ohm 5% Res. 10M 5% Res. 12M 5% Res. 0.25W 1.6M 5% Res. 4.7 ohm 5% Res 1/8 W 0.1 uf 50V 10% X7R 220 pf 2000V NPO 5% 0.1uf 50V 10% X7R 0.001uf 500V10% X7R 0.47uf 25V Tant 10% .010 uf 50V 10% X7R Bridge Rectifier Surge Protection
Manufacturer CP Clare CP Clare Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Tecate Tecate Tecate Tecate Panasonic Tecate Shindengen Teccor
Package Type 32 Lead SOIC SOT-223 `0603 `0603 `0603 0603 `0603 `0603 0603 `0603 `0603 `0603 `0603 `0603 `0603 `0603 `0805 `0805 `0603 `0805 1808 `0805 1206 SMD 0805 N/A D0-214AA
North America Tel: 1-800-272-5273 Fax: 978-524-4900
Europe Tel: +32-11-300868 Fax: +32-11-300890
Asia Tel: 886-2-2523-6368 Fax: 886-2-2523-6369
Japan Tel: 03-3980-2212 Fax: 03-3980-2213
13
14
VCC C8 R1 604K R10 C10 0.001uF 500V R11 10K D1 1 2 2D 4 SP1 P3100SB 3 + R19 12M 0.250W 10M 0.1uF
5.2
APPLICATION NOTE
UPGRADING FROM CPC5600 TO CPC5604
North America Tel: 1-800-272-5273 Fax: 978-524-4900
U1
R2 200K
TX-
TX+
C1 0.1uF
C2 0.1uF
~ -
~
TIP
G1 R7 150K R36 4.7
OH
C3 0.1uF
1 2 3 4 5 6 7 32 31 30 29 28 27 26
Q1 MOSFET 3 S CPC5602C
RING R34 0 ohm R20 1.6M
C11 0.47uF Tant
CPC5604
25 24
RING
CID
RX-
C4 0.1uF R15 100 R16 22.1
1/ W 8
CPC5604 International Schematic
RX+ R12 402K R17 300
C5 0.1uF
Europe Tel: +32-11-300868 Fax: +32-11-300890
R3 150K C24 0.01uF R13 806K .063W R14 806K .063W C7 220pF R5 2000V 1.5M R4 1M R6 C6 220pF 1.5M 2000V U4 Z1* Z2* R24* 2 8.2K 0.250W 3 3 16 3 D2 * 2 14 13 3 590 12 BIT2 7 BRBIT3 BIT4 8 BIT6 BIT5 CPC5601 9 10 R31 Open R32 Open R33 12.1 11 R29 OPEN R30 Open C17 Open 0 ohm C16 0.0047uf R27 6 N/C R28 Open R18 604 Open Drawn: JC/MG BIT1 R25 R26 0 ohm C15 Open 2 B R22* A 15 2 0 Ohm C14* 1 0.47uF 300V Company: CP Clare Corp.
8 9 10 11 12 13 14 15 16 23 22 21 20 19 18 17
VCC TXF1 TXTX+ TX NC GND OH RING CID RXRX+ SNP+ SNPRXF RX BRTXF2 ZTX ZNT TXS BRNTS GAT REF DCS DCF ZDC BRRPB RXS VDD
VCC
R21* 10K
Asia Tel: 886-2-2523-6368 Fax: 886-2-2523-6369
* Required for external ring detect only.
DATA_IN
R23
470
Date: 10/2799
Rev: B
Title: International Reference Design
OPTIONAL: SOFTWARE PROGRAMMABLE CIRCUIT
ALL RESISTORS ARE .100W UNLESS OTHERWISE NOTED
Japan Tel: 03-3980-2212 Fax: 03-3980-2213
APPLICATION NOTE UPGRADING FROM CPC5600 TO CPC5604
5.2.1 CPC5604 International BOM QTY. 1 1 1 1 1 1 1 2 2 1 1 1 2 1 1 1 1 1 1 1 4 1 1 1 1 1 1 1 5 2 1 1 1 1 1 1 1 1 1 2 1 1 51 Designation U1 U4 Q1 R1 R18 R2 R4 R3, R7 R5, R6 R11 R12 R15 R13, R14 R16 R17 R10 R19 R20 R23 R24 R29, R30, R31, R32 R25 R26 R27 R28 R33 R34 R36 C1, C2, C3, C4, C5 C6, C7 C8 C10 C11 C14 C15 C16 C17 C24 SP1 Z1, Z2 D1 D2 TOTAL Description CPC5604A CPC5601D CPC5602C 604k 1% Res. 604 ohm 1% Res. 200k 5% Res. 1M 5% Res. 150k 5% Res. 1.5M 5% Res. 10 K 5% Res. 402k 1% Res. 100 ohm 5% Res. 806K 1% Res. 0.063W 22.1 5% Res. 1/8W 300 ohm 5% Res. 10M 5% Res. 12M 5% Res. 0.25W 1.6M 5% Res. 470 ohm 5% Res. 8.2k 5% Res. 0.25W Open 590 ohm 5% Res. 0 ohm Res. 0 ohm Res. Open 16.5 ohm 5% Res. 0 ohm Res. 4.7 ohm 5% Res 1/8W 0.1 uf 50V 10% X7R 220 pf 2000V NPO 5% 0.1uf 50V 10% X7R 0.001uf 500V10% X7R 0.47uf 25V Tant 10% .47uf 300V Open 0.0047 uf 50V 10% X7R Open for future use 0.01uf 50V 10% X7R Surge Protection Zener 20V Bridge Rectifier Diode BAS16 Manufacturer CP Clare CP Clare CP Clare Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Tecate Tecate Tecate Tecate Panasonic Tecate Tecate Tecate Teccor Rohm Shindengen Rohm Package Type 32 Lead SOIC SO16 SOT-223 `0603 `0603 `0603 0603 `0603 `0603 `0603 `0603 `0603 `0603 `0603 `0603 `0603 `0805 `0805 `0603 `0603 `0603 `0603 `0603 `0603 `0603 `0603 `0603 `0603 `0805 1808 `0805 1206 SMD 1812 `0805 `0805 `0805 0805 D0-214AA SOT-23 N/A SOT-23
North America Tel: 1-800-272-5273 Fax: 978-524-4900
Europe Tel: +32-11-300868 Fax: +32-11-300890
Asia Tel: 886-2-2523-6368 Fax: 886-2-2523-6369
Japan Tel: 03-3980-2212 Fax: 03-3980-2213
15
16
VCC C8 R1 604K R10 C10 0.001uF 500V R11 10K D1 1 2 2D 4 R19 12M 0.250W 3 + 10M 0.1uF
5.3
APPLICATION NOTE
UPGRADING FROM CPC5600 TO CPC5604
North America Tel: 1-800-272-5273 Fax: 978-524-4900
U1
R2 200K
TX-
TX+
C1 0.1uF
C2 0.1uF
~ -
~
SP1 P3100SB
TIP
G1 R7 150K R36 4.7
C3 0.1uF
Q1 MOSFET 3 S CPC5602C
OH
1 2 3 4 5 6 7 32 31 30 29 28 27 26 25 24
CPC5604 CTR21 Schematic
RING
RING
CPC5604
R20 1.6M
C11 0.47uF Tant
CID
RXR15 100 R16 22.1
1/ W 8
C4 0.1uF
Europe Tel: +32-11-300868 Fax: +32-11-300890
R3 150K C24 0.01uF R13 806K .063W R14 806K .063W C25 0.0047uF R18 604 R17 300
RX+ R12 402K
C5 0.1uF
8 9 10 11 12 13 14 15 16 23 22 21 20 19 18 17
VCC TXF1 TXTX+ TX NC GND OH RING CID RXRX+ SNP+ SNPRXF RX BRTXF2 ZTX ZNT TXS BRNTS GAT REF DCS DCF ZDC BRRPB RXS VDD
C7 220pF R5 2000V 1.5M R4 1M R6 C6 220pF 1.5M 2000V R21 12.1 U2 6 CTRL 1 2 3 4 5
Asia Tel: 886-2-2523-6368 Fax: 886-2-2523-6369
Drawn: JC/MG
Date: 10/27/99 Company: CP Clare Corp. Title: CTR21 Reference Design
Rev: B
Japan Tel: 03-3980-2212 Fax: 03-3980-2213
ALL RESISTORS ARE .100W UNLESS OTHERWISE NOTED
APPLICATION NOTE UPGRADING FROM CPC5600 TO CPC5604
5.3.1 CPC5604 CTR21 BOM QTY. 1 1 1 1 1 1 2 2 1 1 1 2 1 1 1 1 1 1 1 5 2 1 1 1 1 1 1 1 1 35 Designation U1 Q1 R1 R4 R18 R2 R3, R7 R5, R6 R11 R12 R15 R13, R14 R16 R17 R10 R19 R20 R21 R36 C1, C2, C3, C4, C5 C6, C7 C8 C10 C11 C24 C25 D1 SP1 U2 TOTAL Description CPC5604A CPC5602C 604k 1% Res. 1M 5% Res. 604 ohms 1% Res. 200k 5% Res. 150k 5% Res. 1.5M 5% Res. 10 K 5% Res. 402k 1% Res. 100 ohm 5% Res. 806K 1% Res. 0.063W 22.1 5% Res. 1/8W 300 ohm 5% Res. 10M 5% Res. 12M 5% Res. .25W 1.6M 5% Res. 16.5 5% Res. 0.063W 4.7 ohm 5% Res 1/8W 0.1 uf 50V 10% X7R 220 pf 2000V NPO 5% 0.1uf 50V 10% X7R 0.001uf 500V10% X7R 0.47uf 25V Tant 10% 0.01uf 50V 10% X7R 0.0047uf 50V 10% X7R Bridge Rectifier Surge Protection 4N35 Manufacturer CP Clare CP Clare Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Tecate Tecate Tecate Tecate Panasonic Tecate Tecate Shindengen Teccor Package Type 32 Lead SOIC SOT-223 `0603 0603 `0603 `0603 `0603 `0603 `0603 `0603 `0603 `0603 `0603 `0603 `0603 `0805 `0805 `0603 `0603 `0805 1808 `0805 1206 SMD `0805 `0805 N/A D0-214AA
North America Tel: 1-800-272-5273 Fax: 978-524-4900
Europe Tel: +32-11-300868 Fax: +32-11-300890
Asia Tel: 886-2-2523-6368 Fax: 886-2-2523-6369
Japan Tel: 03-3980-2212 Fax: 03-3980-2213
17
18
VCC C8 R1 604K R10 C10 0.001uF 500V R11 10K D1 1 2 2D 4 R19 12M 0.250W 3 + 10M 0.1uF
5.4
APPLICATION NOTE
UPGRADING FROM CPC5600 TO CPC5604
North America Tel: 1-800-272-5273 Fax: 978-524-4900
U1
R2 200K
TX-
TX+
C1 0.1uF
C2 0.1uF
~ -
~
SP1 P3100SB
TIP
G1 R7 150K R36 4.7
C3 0.1uF
Q1 MOSFET 3 S CPC5602C
OH
1 2 3 4 5 6 7 32 31 30 29 28 27 26 25 24
RING
RING
CPC5604
R20 1.6M
C11 0.47uF Tant
CID
RXR15 100 R16 22.1
1/ 8W
C4 0.1uF
CPC5604 CTR21 with exceptions Schematic
Europe Tel: +32-11-300868 Fax: +32-11-300890
R3 150K C24 0.01uF R13 806K .063W R14 806K .063W R17 300
RX+ R12 402K
C5 0.1uF
8 9 10 11 12 13 14 15 16 23 22 21 20 19 18 17
VCC TXF1 TXTX+ TX NC GND OH RING CID RXRX+ SNP+ SNPRXF RX BRTXF2 ZTX ZNT TXS BRNTS GAT REF DCS DCF ZDC BRRPB RXS VDD
C7 220pF R5 2000V 1.5M R4 1M R6 C6 220pF 1.5M 2000V
Asia Tel: 886-2-2523-6368 Fax: 886-2-2523-6369
R21 12.1 R18 604 6 5 U3 4 CTRL 1 2 3 4 5 CTRL 1 2 3 6
R22 0 ohm
U2 C18 0.0047uF R35 Open
CTRL
1
2
3
U5 6 5 Date: 10/27/99 4 Company: CP Clare Corp. Title: CTR21 with Exceptions Reference Design ALL RESISTORS ARE .100W UNLESS OTHERWISE NOTED Rev: B Drawn: JC/MG
Japan Tel: 03-3980-2212 Fax: 03-3980-2213
APPLICATION NOTE UPGRADING FROM CPC5600 TO CPC5604
5.4.1 CPC5604 CTR21 with exceptions BOM
QTY. 1 1 1 1 1 1 2 2 1 1 1 2 1 1 1 1 1 1 1 1 1 5 2 1 1 1 1 1 1 1 1 1 1 39
Designation U1 Q1 R1 R18 R2 R4 R3, R7 R5, R6 R11 R12 R15 R13, R14 R16 R17 R10 R19 R20 R21 R22 R35 R36 C1, C2, C3, C4, C5 C6, C7 C8 C10 C11 C18 C24 D1 SP1 U2 U3 U5 TOTAL
Description CPC5604A CPC5602C 604k 1% Res. 604 ohm 1% Res. 200k 5% Res. 1M 5% Res 150k 5% Res. 1.5M 5% Res. 10 K 5% Res. 402k 1% Res. 100 ohm 5% Res. 806K 1% Res. 0.063W 22.1 5% Res. 1/8W 300 ohm 5% Res. 10M 5% Res. 12M 5% Res. 0.25W 1.6M 5% Res. 16.5 5% Res. 0.063W 0 ohm Open 4.7 ohm 5% Res 1/8W 0.1 uf 50V 10% X7R 220 pf 2000V NPO 5% 0.1uf 50V 10% X7R 0.001uf 500V10% X7R 0.47uf 25V Tant 10% 0.0047uF 50V 10% X7R 0.01uf 50V 10% X7R Bridge Rectifier Surge Protection 4N35 4N35 4N35
Manufacturer CP Clare CP Clare Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Meritek Tecate Tecate Tecate Tecate Panasonic Tecate Tecate Shindengen Teccor
Package Type 32 Lead SOIC SOT-223 `0603 `0603 `0603 0603 `0603 `0603 `0603 `0603 `0603 `0603 `0603 `0603 `0603 `0805 `0805 `0603 `0603 `0603 `0603 `0805 1808 `0805 1206 SMD `0805 0805 N/A D0-214AA
North America Tel: 1-800-272-5273 Fax: 978-524-4900
Europe Tel: +32-11-300868 Fax: +32-11-300890
Asia Tel: 886-2-2523-6368 Fax: 886-2-2523-6369
Japan Tel: 03-3980-2212 Fax: 03-3980-2213
19
20
VCC
5.5
Refer to LITELINK reference schematics for typical line side circuit details
APPLICATION NOTE
UPGRADING FROM CPC5600 TO CPC5604
North America Tel: 1-800-272-5273 Fax: 978-524-4900
R1 604K
Lucent Technologies Venus DSP1670_160_MQFP
U1
R2 200K
OHRCN 61
C1 0.1uF C2 0.1uF C3 0.1uF
RIDETN 43
1 2 3 4 5 6 7 32 31 30 29 28 27 26 25 24
CIDN 62
CPC5604 Lucent Reference design
Europe Tel: +32-11-300868 Fax: +32-11-300890
R3 150K
CPC5604
Lucent Technologies CSP1034_MFQP
8 9 10 11 12 13 14 15 16
VCC TXF1 TXTX+ TX NC GND OH RING CID RXRX+ SNP+ SNPRXF RX BRTXF2 ZTX ZNT TXS BRNTS GAT REF DCS DCF ZDC BRRPB RXS VDD
23 22 21 20 19 18 17
AOUTN 8
0dB
1
AOUTP 7 11
C5 0.1uF R4 1M R6 C6 220pF 1.5M 2000V
AINP
0dB
1
C4 0.1uF
Asia Tel: 886-2-2523-6368 Fax: 886-2-2523-6369
AINN 10
C7 220pF R5 2000V 1.5M
Drawn: SM
Date: 6/24/99 Company: CP Clare Corp.
Rev: A
Japan Tel: 03-3980-2212 Fax: 03-3980-2213
Title: Interconnection To Lucent (CPC5600A1X)
1. Lucent chips expect a zero dB drop between the codec and Tip and Ring.
ALL RESISTORS ARE .100W UNLESS OTHERWISE NOTED
5.6
North America Tel: 1-800-272-5273 Fax: 978-524-4900
VCC
Conexant MCU L2800
Refer to LITELINK reference schematics for typical line side circuit details.
~Rly1(~OH) 70 R1 10K .063W R4 604K
RINGD 32
U1
R5 200K
~RLY4(~CALLID) 6 R2 10K .063W C1 0.1uF C2 0.1uF C3 0.1uF
R3 20K .063W
1 2 3 4 5 6 7
32 31 30 29 28 27 26 25 24
CPC5604 Conexant Reference design
Europe Tel: +32-11-300868 Fax: +32-11-300890
Conexant MDP R6764
CPC5604
TXA1 30
R3 150K
-6dB 1
C5 0.1uF
TXA2 31
8 9 10 11 12 13 14 15 16
VCC TXF1 TXTX+ TX NC GND OH RING CID RXRX+ SNP+ SNPRXF RX
RiN 35
-6dB 1
BRTXF2 ZTX ZNT TXS BRNTS GAT REF DCS DCF ZDC BRRPB RXS VDD
23 22 21 20 19 18 17
C7 220pF R8 2000V 1.5M R4 1M R9 C6 220pF 1.5M 2000V
Asia Tel: 886-2-2523-6368 Fax: 886-2-2523-6369
Rev: Drawn: SM Company: CP Clare Corp. Title: Interconnection to Conexant(Rockwell) (CPC5600A1X) Date: 6/24/99 A
UPGRADING FROM CPC5600 TO CPC5604
Japan Tel: 03-3980-2212 Fax: 03-3980-2213
Interconnection diagram is based on the Conexant(Rockwell) RC56D Chip solution. 1. Conexant Chipsets rely on a 6dB loss between MDP and tip and ring. This is solved by placing the R1, R2, R3, resistor circuit in the Transmit Path and the use of a single end of the differential receive.
ALL RESISTORS ARE .100W UNLESS OTHERWISE NOTED
APPLICATION NOTE
21
Worldwide Sales Offices
NORTH AMERICA
North American Sales Office Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-272-5273 Eastern Regional Sales Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-272-5273 Mid-American Regional Sales Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-272-5273 Northwestern Regional Sales Clare 2010 Crow Canyon Place Suite 100 San Ramon, CA 94583 Tel: 1-925-277-3422 Fax: 1-925-277-3423 Toll Free: 1-800-272-5273 Southwestern Regional Sales Clare 2816 Nevis Circle Costa Mesa, CA 92626 Tel: 1-714-556-3661 Fax: 1-714-546-4254 Toll Free: 1-800-272-5273 Canadian Regional Sales Clare Canada Ltd. 3425 Harvester Road Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824
EUROPE
European Sales Office CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 France CP Clare France 31 Cours des Juilliottes 94700 Maisons Alfort France Tel: 33 (1) 56-29-14-14 Fax: 33 (1) 56-29-14-15 Germany CP Clare Elektronik GmbH Leonberger Strasse 20 D-71638, Ludwigsburg Tel: 49-7141-9543-0 Fax: 49-7141-9543-20 Italy C.L.A.R.E.s.a.s. Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 Sweden Clare Sales Comptronic AB Box 167 S-16329 Spanga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797
ASIA PACIFIC
Asian Sales Office Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369
JAPAN
Japanese Sales Office Clare Tosei Building 5F 2-23-1, Ikebukuro, Toshima-ku Tokyo 171 Tel: 03-3980-2212 Fax: 03-3980-2213
HEADQUARTERS
Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-272-5273
http://www.clare.com
Clare makes no assertion or warranty that the circuitry and the uses thereof disclosed herein are non-infringing on any valid US or foreign patents. CP Clare assumes no liability as a result of the use of said specifications and reserves the right to make changes to specifications without notice. CP Clare does not authorize or warrant any CP Clare device for use in life support devices and/or systems. Contact your nearest CP Clare Sales Office for the latest specifications.
Protected by U.S. Patent #5,946,394 Specification: AN-CPC5600/CPC5604-R1 (c) Copyright 1999, Clare All rights reserved. Printed in USA. 11/2/99

▲Up To Search▲

Price & Availability of CPC5600A

	To Download CPC5600A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .